All exams ← Home
Home · Forklift Operator Theory Test (ITSSAR/AITT/RTITB)

Forklift Operator Theory Test (ITSSAR/AITT/RTITB)

This test is for aspiring and current forklift operators seeking certification in Great Britain. Passing is a mandatory step towards gaining or renewing a licence to operate various types of lift trucks safely.

Written against the published specification.

See all-access plans
Pass mark 20/25 25 minutes Real test fee Varies (part of course fee) ITSSAR, AITT, RTITB How many can I get wrong?
About this practice. Revision Robin is built and maintained by Bloor Engineering Ltd, a UK-registered company. Our Forklift Operator Theory Test (ITSSAR/AITT/RTITB) questions are written and reviewed in-house to match the current syllabus, each with a plain-English worked explanation. They are original practice material, not the official exam questions and not affiliated with or endorsed by ITSSAR, AITT, RTITB. Always confirm current test rules, fees and content with the official provider. See our Terms and Privacy.
Sit a full mock under the clock at least once. Nerves are half the battle.
Free practice questions
Try 3 real Forklift Operator Theory Test (ITSSAR/AITT/RTITB) questions
Have a go, then reveal the worked explanation. A taster from a bank of 207 original questions. Unlock for unlimited drills and full timed mocks.
Q1. What is the primary piece of legislation that governs the health, safety, and welfare of people in all workplaces in Great Britain?
  • A.  The Provision and Use of Work Equipment Regulations 1998 (PUWER)
  • B.  The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
  • C.  The Health and Safety at Work etc. Act 1974 (HASAWA)
  • D.  The Road Traffic Act 1988
Show answer & explanation
✓ Answer: C. The Health and Safety at Work etc. Act 1974 (HASAWA)
The Health and Safety at Work etc. Act 1974 is the main law covering occupational health and safety, placing duties on employers, employees, and others.
Q2. When travelling on a ramp or incline with a loaded forklift, which direction should the load be facing?
  • A.  Facing downhill at all times.
  • B.  Facing uphill at all times.
  • C.  It does not matter, as long as you travel slowly.
  • D.  Sideways across the gradient to maintain a low centre of gravity.
Show answer & explanation
✓ Answer: B. Facing uphill at all times.
The load must always face uphill, whether you are ascending or descending, to maintain the truck's stability and prevent it from tipping over.
Q3. During a pre-use check, you discover a small, dripping leak from a hydraulic hose. What must you do?
  • A.  Place a drip tray under it and continue your shift.
  • B.  Wipe it clean and check it again in an hour.
  • C.  Attempt to tighten the hose fitting yourself.
  • D.  Do not operate the truck, isolate it, and report the defect immediately.
Show answer & explanation
✓ Answer: D. Do not operate the truck, isolate it, and report the defect immediately.
Any hydraulic fluid leak is a serious defect. It can lead to loss of hydraulic functions (like lifting) and creates a dangerous slip hazard. The truck must be taken out of service.
Exam mode
Full mock exam
25 random questions, real timing, marked against the official pass mark. Different every time.
The first 8 of 25 questions are free, with your score on them. Finishing the paper, your result against the pass mark and every answer explained come with the paid version.
Practice material only. This is revision practice, not official training, assessment or certification, and not a substitute for the required course or supervised experience. Always confirm the current requirements with the official awarding body or test provider before relying on it.
Try it free
Topic drills
Ten quick questions on one topic, marked instantly with explanations.
1 free drill left.
Health and Safety Legislation · 30
Operator's Safety Code · 30
Pre-use Checks and Maintenance · 29
Stability and Load Capacity · 30
Load Handling, Stacking and De-stacking · 29
Refuelling and Recharging Procedures · 20
Safe Manoeuvring and Hazard Awareness · 19
Forklift Anatomy and Controls · 20

Who has to sit the Forklift Operator Theory Test (ITSSAR/AITT/RTITB)

Who needs a Forklift Operator Theory Test (ITSSAR/AITT/RTITB)?

Anyone who operates a forklift truck in a UK workplace, as required by employers under PUWER 98 and the Health and Safety at Work etc. Act 1974.

The real Forklift Operator Theory Test (ITSSAR/AITT/RTITB): format

How many questions are in the Forklift Operator Theory Test (ITSSAR/AITT/RTITB)?

The real Forklift Operator Theory Test (ITSSAR/AITT/RTITB) has 25 questions and lasts 60 minutes. Our mock uses 25 questions in 25 minutes.

What is the Forklift Operator Theory Test (ITSSAR/AITT/RTITB) pass mark?

Real exam pass mark: 80%. Our mock marks you at 20 out of 25, the threshold we mark against.

How hard is it

What is the Forklift Operator Theory Test (ITSSAR/AITT/RTITB) pass rate?

Real exam first-time pass rate: 90%. Difficulty: Moderate, achievable with adequate preparation and attention to safety details.

Why people fail it

Why do people fail the Forklift Operator Theory Test (ITSSAR/AITT/RTITB)?

Figures for the real exam from vertexaisearch.cloud.google.com, checked October 2026. Fees and rules change, so confirm with the test provider before you book.
Forklift Operator Theory Test (ITSSAR/AITT/RTITB): common questions
Frequently asked
How long do you get?
The test is timed at 25 minutes. Our full mock runs on the same clock so you can practise your pacing.
Are these the real exam questions?
No. Our questions are original and written to match the current syllabus, so they give realistic practice without copying the official paper. Every answer comes with a plain-English explanation. Always confirm current rules and content with ITSSAR, AITT, RTITB.
How much does the official test cost?
The official ITSSAR, AITT, RTITB fee is Varies (part of course fee). Revision Robin practice is separate and helps you pass first time so you only pay that fee once.