← All exams
Home · Canadian Firearms Safety Course Exam Prep

Canadian Firearms Safety Course Exam Prep

CFSC written test prep for the PAL.

Pass mark 25/50 45 minutes RCMP CFP How many can I get wrong?
Weak on a topic? Drill just that one till it clicks, then move on.
Free practice questions
Try 3 real Canadian Firearms Safety Course Exam Prep questions
Have a go, then reveal the worked explanation. A taster from a bank of 275 original questions — unlock for unlimited drills and full timed mocks.
Q1. Under the Firearms Act, what does the acronym PAL stand for?
  • A.  Possession and Acquisition Licence
  • B.  Personal Arms Licence
  • C.  Public Access Licence
  • D.  Provincial Authorization Licence
Show answer & explanation
✓ Answer: A. Possession and Acquisition Licence
PAL stands for Possession and Acquisition Licence, the standard federal licence that allows a person to both possess and acquire non-restricted firearms and ammunition. A Restricted PAL (R-PAL) is required for restricted firearms. The other expansions are invented terms that do not appear in Canadian firearms law.
Q2. What is the primary reason the CFSC teaches shooters to always assume a firearm is loaded?
  • A.  It satisfies a legal requirement under the Firearms Act for insurance purposes
  • B.  It builds a consistent habit that prevents complacency, even when a firearm has just been checked
  • C.  It is only necessary for firearms without a manual safety
  • D.  It replaces the need to ever check the chamber
Show answer & explanation
✓ Answer: B. It builds a consistent habit that prevents complacency, even when a firearm has just been checked
Treating every firearm as loaded creates an unbreakable habit of careful handling regardless of the actual state of the firearm. Most firearm accidents happen because someone believed, incorrectly, that a firearm was already unloaded.
Q3. How is shotgun gauge traditionally defined?
  • A.  The number of lead balls of bore diameter that together weigh one pound
  • B.  The diameter of the bore in millimetres
  • C.  The length of the shotshell in inches
  • D.  The weight of the shot charge in ounces
Show answer & explanation
✓ Answer: A. The number of lead balls of bore diameter that together weigh one pound
Gauge is a traditional measurement: it equals the number of solid lead balls of a diameter equal to the bore that together weigh one pound. A 12 gauge bore, for example, is the diameter of a lead ball that is one-twelfth of a pound. The .410 bore is the exception, being named by actual bore diameter in inches rather than by this gauge system.
Start here
Ten questions to see where you stand
Two minutes, no timer, marked the moment you finish with every answer explained. Then you'll know which topics need the work before you sit a full mock.
Exam mode
Full mock exam
50 random questions, real timing, marked against the official pass mark. Different every time.
Create a free account for a full mock
No card needed. A free account unlocks a full timed mock and 3 drills on every exam.
Practice material only. This is revision practice, not official training, assessment or certification, and not a substitute for the required course or supervised experience. Always confirm the current requirements with the official awarding body or test provider before relying on it.
Try it free
Topic drills
Ten quick questions on one topic, marked instantly with explanations.
1 free drill left — then a free account unlocks 3 + a full mock.
Firearms law & the PAL · 50
ACTS & PROVE safety rules · 45
Ammunition & firearm types · 45
Safe handling & carrying · 45
Storage, transport & display rules · 45
Range rules & field safety · 45
Canadian Firearms Safety Course Exam Prep — common questions
Frequently asked
How many questions are in the Canadian Firearms Safety Course Exam Prep?
The exam has 50 questions. Every Revision Robin mock uses the same 50-question format so your practice matches the real thing.
What is the pass mark for the Canadian Firearms Safety Course Exam Prep?
You need 25 out of 50 correct to pass, which is about 50%. Our mocks mark you against this exact threshold.
How long do you get?
The test is timed at 45 minutes. Our full mock runs on the same clock so you can practise your pacing.
Are these the real exam questions?
No. Our questions are original and written to match the current syllabus, so they give realistic practice without copying the official paper. Every answer comes with a plain-English explanation. Always confirm current rules and content with RCMP CFP.